Need help?Do you have a question about the Philips GC7933/30 and is the answer not in the manual?
General| Type | Steam Generator Iron |
|---|---|
| Power | 2400 W |
| Water Tank Capacity | 1.5 L |
| Heating Time | 2 min |
| Weight of Iron | 1.3 kg |
| Vertical Steam | Yes |
| Calc Clean Reminder | Yes |
| Auto Shut-Off | Yes |
| Self-Cleaning | Yes |
| Steam Output | 120 g/min |
| Steam Boost | 450 g |
| Pressure | 6.5 bar |
Overview of the steam generator iron's components.
Guidance on using tap water or distilled/demineralized water for the iron.
Instructions on how to fill the water tank of the steam generator iron.
Identifies fabrics suitable and unsuitable for ironing with the appliance.
Basic steps for operating the steam generator iron for ironing.
How to use the steam boost function for stubborn creases.
Instructions for removing wrinkles from hanging fabrics using steam.
Safe ways to rest the iron on the ironing board or base.
Explanation of the automatic shut-off feature for safety and energy saving.
Overview of the smart descaling and cleaning system.
Describes the reminders for performing the Calc-Clean process.
Step-by-step guide for descaling the iron using the Calc-Clean container.
Instructions on how to properly store the steam generator iron after use.
Solutions for when the iron fails to produce steam.
Addresses issues with Calc-Clean reminders and lack of steam.
Explains why water droplets might appear on the soleplate.
Causes and solutions for dirty water expelled from the soleplate.
What to do if water unexpectedly flushes from the soleplate.
Troubleshooting steps when the Calc-Clean process fails to initiate.
To Next Page