Philips GC9240 User Manual

Service Manual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Steam Generator
GC9240
11/10
PRODUCT INFORMATION
Fast & powerful crease removal
- Soleplate: SteamGlide
- OptimalTemp
- Continiuous steam output: 120 g/min
- Steam boost: 260 g/min
- Vertical steam
- Steam pressure: Up to 6.0 bar
- Steam tip
- Power: 2400 W
Easy to use
- Water tank capacity: 1500 ml
- Filling and emptying water: Detachable water tank
Extra large opening door
- Refill any time
- Heat-up time: 2 min
- Auto Off
- Hose storage: Hose storage compartment
- Cord storage: Cord storage compartment
- Power cord lenght: 1.8 m
- Cord freedom (swivel): 180 degree cord freedom
- Hose length: 1.7 m
- Safe for all fabrics: Even for delicates like silks
- Carry Lock
Calc management
- Suitable for tap water
- Calc clean solution: Easy De-calc
- Calc clean reminder
EMF & Service Information
- This product meets the requirements regarding interference
suppression on radio & TV.
- After the product has been repaired, it should function
properly & has to meet the safety requirements as officially
laid down at this moment.
TECHNICAL INFORMATION
Voltage : 220 - 240 V
Frequency : 50 - 60 Hz
Power - Iron : 800 W at 230 V
- Boiler : 1370 W at 230 V
Dimension (F-box) : 491 mm x 305 mm x 335 mm
(Depth x Width x Height)
Weight : Weight of iron: 1.2 kg
Weight of iron + base: 5 kg
Optimal Temp technology
- Delivers always perfect combination of steam and temperature
- 100% easy to use, no adjustment required
- 100% safe on all ironable garments
- 100% effective on all fabrics, no other iron is faster
- Tested and approved by independent textile experts
Always the perfect setting thanks to:
1 - Cylonic steam chamber
2 - Advanced Smart control processor
Easy De-calc
Easy De-calc cap allows hassle free & effective scale removal
to extend the life of the steam generator.
Carry Lock
Lock your iron securely & carry your appliance easy.
1
2

Philips GC9240 Specifications

General

Type	Steam Generator Iron
Power	2400 W
Steam Pressure	6.5 bar
Steam Boost	420 g/min
Water Tank Capacity	2.5 L
Heating Time	2 min
Cord Length	1.8 m
Vertical Steam Function	Yes
Calc Clean Reminder	Yes
Steam Output	120 g/min
Auto Shut-Off	Yes
Self-Cleaning	Yes
Anti-Calc System	Yes

Summary

Product Information

Fast & Powerful Crease Removal

Key features include steam output, steam boost, vertical steam, and steam pressure.

Optimal Temp Technology

Technology ensuring perfect steam and temperature combination, safe for all fabrics.

Disassembly Advice - Iron

Disassembly Advice - Stand

Electrical Block Diagram

Wiring Diagram

Detailed Wiring Schematic

Comprehensive wiring diagram illustrating connections between all components.

Repair Instructions - General Checks

Cord Set Replacement

Guidelines for replacing the power cord set due to high wattage.

Microswitch Assembly Replacement

Precautions for replacing the microswitch assembly to avoid wire tension issues.

Boiler Cleaning Precautions

Warning against using corrosive chemicals for cleaning the boiler assembly.

Electrovalve/Pump Replacement Sealing

Advice on using loctite for sealing when replacing electrovalve or pump.

Post-Repair Operational Tests

Common tests for ensuring proper function and safety after repair.

Soleplate Temperature Verification

Procedure to check soleplate temperature against IEC requirements.

Leakage Current Measurement

Method to measure leakage current to ensure it's within IEC safety limits.

Water Leakage & Functionality Checks

Checks for water leaks and proper operation of features like steam.

Loose Part Inspection

Inspection to ensure no loose parts remain after repair.

Crimping Procedures

Crimping INOX CLAMP 34

Instructions for correctly crimping INOX CLAMP 34 for hose replacement.

Electrovalve Replacement Procedure

Replacing ELECTROVALVE 37

Precautions for replacing the electrovalve using a torque wrench.