12
Fabrics with this symbol are not ironable. These fabrics include synthetic
fabrics such as Spandex or elastane, Spandex-mixed fabrics and
polyolens (e.g. polypropylene), but also prints on garments.
Ironing
1 Unfold your ironing board and set it to the appropriate height.
2 Place the garment you want to iron on the ironing board.
3 You can start ironing when the ‘iron ready’ light stops ashing and
lights up continuously.
Note: The default steam setting is the normal steam mode. It is
recommended to use this mode for all ironable fabrics.
Steam trigger
- Press the steam trigger to start ironing.
Tip: If you have thick garments keep the steam trigger pressed continuously
when you move the iron over the fabric. Then move the iron over the same
area a few more times without steam to dry the fabric. The steam will stop
when you release the steam trigger.
Note: For the best results on silk and shiny synthetic fabrics it is
recommended to keep the steam trigger pressed continuously while ironing.
Steam boost function
The steam boost function is designed to help tackle difcult creases.
- Double press the steam trigger for a continuous shot of steam. It is
not necessary to press and hold the steam trigger continuously when
the steam boost function is activated.
To stop the steam boost function, press the steam trigger once.
2x
ENGLISH
To Next Page
Loading...
Need help?
General