To Next PageTo Next Page
Need help?Do you have a question about the Philips Perfect Care Elite GC9642 and is the answer not in the manual?
General| Type | Steam generator iron |
|---|---|
| Power | 2400 W |
| Water Tank Capacity | 1.8 L |
| Soleplate | T-ionicGlide |
| Weight of Iron | 0.8 kg |
| OptimalTEMP Technology | Yes |
| Vertical Steam Function | Yes |
| Calc Clean Reminder | Yes |
| Auto Shut-off | Yes |
| Self-cleaning | Yes |
| Anti-calc System | Yes |
| Cord Length | 1.8 m |
| Weight | 5.1 kg |
Details on ECO settings, energy saving, and limescale management features.
Covers voltage, dimensions, and weight of the appliance.
Disassembly steps for the trigger, housing cap, and main housing.
Steps for the front lock mechanism, UI power board, and buttons.
Covers chassis, cord clamp, and rubber bung disassembly.
Steps for removing water tank, safety caps, boiler assembly, and related parts.
Covers inlet supports, pump assembly, power boards, and sensors.
Details disassembly of cord sets, hoses, belt loops, and stand bottom.
Procedure to check soleplate temperature against IEC requirements.
Procedure to measure leakage current between live/neutral and earth.
Check for water leaks and proper product functionality during operation.
Inspect for loose parts and check for open circuit in the fuse.
Overview of Self-Check mode as a preliminary hardware function check.
Steps to perform before initiating the Self-Check mode.
Displaying software version and checking initial LED and component status.
Verifying operation of pump, buzzer, LEDs, Turbo LED, and iron temperature sensing.
Checking boiler temperature sensing, water level probe, steam trigger, and e-valve.
Diagnosing issues related to no pumping sound or no buzzer sound.
Troubleshooting for LEDs not lighting up and zero-crossing detection circuit errors.
Diagnosing errors in iron/boiler temperature sensing and heater power.
Tips for resolving water probe errors and e-valve not opening.
