13ENGLISH
Problem Possible cause Solution
The appliance is not switched on. Insert the plug in the wall socket and press the
on/o button to switch on the appliance.
The appliance has
switched o. The light
in the on/o button
ashes.
The auto-o function is activated
automatically when the appliance
has not been used for more than 10
minutes.
Press the power on/o button to switch on the
appliance again.
The appliance
produces a pumping
sound.
Water is pumped into the boiler
inside the appliance. This is normal.
If the pumping sound continues nonstop, switch
o the appliance and remove the plug from the
wall socket. Contact an authorised Philips service
centre.
To Next Page
Loading...
