GC9920
6-19
DISASSEMBLY ADVICE - MOVING COLUMN
MOVING COLUMN ASSY 15
PLATE PIVOT FLANGE LEFT 16
PLATE PIVOT FLANGE RIGHT 17
HANDLE LIFT LEFT 18
HANDLE LIFT RIGHT 19
Remove screws M1 - M4
Disassemble BACK COVER TOP 21
Remove screw S1
Remove screws T1, T2, T9, T10
Disassemble PANEL LEFT ASSY 24
Disconnect 4-pole cable W4, 2-pole cable W5,
Quick-connectors L3, N3 & Earth
(Board heater)
on STAND LECTRONICS 37
Undress the disconnected wires so that their ends are hanging
freely from position Loc 1:
Loc 1
Remove screw M5
Press HANDLE LIFT LEFT 18 & HANDLE LIFT
RIGHT 19
Pull upwards IRONING BOARD-MOVING COLUMN
assy, detaching completely from the Stand.
Place IRONING BOARD-MOVING COLUMN
upside down, lying fl at on ironing board
surface as follows:
Unhook 2x straps from the springs as follows:
Strap 1
Strap 2
Spring 1
Spring 2
To Next Page
Loading...
Need help?
General
