Philips GoPure GP3201 - Page 5

5
Notice:
1 The safety belt may not be
suitable to the armrest of all
car models.
2 Unpack the lter before using
3 Install and use Philips GoPure car air purier
in your car
3.2 Connection and operation
1 Connect the power adapter
to a 12V outlet in your car.
When the car power supply
on, the device starts running
automatically.
When the car power supply
o, the device turns o
automatically.
m Warning
In case of some cars continue
to power the 12V outlet when
the engine is o. Please
disconnected the device with
12V outlet before leaving to
prevent draining the battery.
1 Place the safety belt over
the device as shown.
3.1 Installation-using the
headrest or armrest
2 You may install Philips
GoPure on front seat headrest
or armrest of your car.