Do you have a question about the Philips 2000i Series and is the answer not in the manual?
Connectivity | Wi-Fi |
---|---|
Bacteria Filtration Efficiency | 99.9% |
Gas Filtration | Yes |
Pre-filter | Yes |
Sleep Mode | Yes |
Child Lock | Yes |
Filter Replacement Indicator | Yes |
Filtration Technology | VitaShield IPS |
Color | White |
Filter Type | HEPA, Activated Carbon |
Particle Filtration Efficiency | 99.97% |
Virus Filtration Efficiency | 99.9% |
Smart Control | Yes |
Air Quality Sensor | Yes |
Details the components of the air purifier, including the control panel, air outlet, particle sensor, filter, and back cover.
Explains the function of various control buttons and indicators on the appliance, such as power, mode, and light controls.
Step-by-step guide on how to properly install the air purification filter into the appliance.
Describes the different states of the Wi-Fi indicator light and their meanings for connection status.
Instructions for first-time connection and resetting the Wi-Fi for the air purifier.
Details the air quality light colors and their corresponding levels for PM2.5 and IAI.
Instructions on how to power the air purifier on and off, including warming up and auto mode.
Guide to selecting different operating modes like Auto, Turbo, Gentle, and Sleep.
Information on how to switch between different display indicators, such as PM2.5 level.
How to manually control lights and how the light sensor adjusts panel brightness.
Instructions on how to check the remaining service life of the filter using its color status.
Guidance on cleaning the interior and exterior surfaces of the air purifier with a soft cloth.
Instructions for cleaning the particle sensor inlet and outlet every two months.
Steps to clean the surface of the filter using a vacuum cleaner when the cleaning alert appears.
Procedure for replacing the air purifier filter when the replacement alert is indicated.
How to manually reset the filter lifetime counter after replacing the filter.