Philips 2000i Series - Changing Mode Settings; Switching Display Indicators; Light On;Off Function; Checking Filter Status

5EN
English
Changing the mode setting
You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by
touching the button�
1 Auto mode ( ): The air purier automatically adjusts the fan speed in
accordance with the ambient air quality (g l)�
2 Turbo mode ( ): The air purier operates on the highest speed (g m)�
3 Gentle mode ( ): The air purier operates at a low speed (g n)�
4 Sleep mode ( ): The air purier operates quietly at a low speed� After
3 seconds, the screen lights o (g o)�
Switching the display indicator
Note:
• The appliance display PM2�5 level by default (g p & g q)�
Using the light on/o function
You can touch the light on/o button manually to turn o all lights and the
control panel� Touch any button to wake up all lights (g r & g s)�
With the light sensor:
• The control panel can automatically turn on, turn o or dim according to
the ambient light�
• The control panel will be o or dim when the ambient light is dark�
You can touch any button to wake up all lights� If no further operation, all
lights will be o or dim again to match with the ambient light�
Checking the lter status
• Touch the lter status check/reset button to check the lter service life
status (g t)�
Icon color Display (%)
Blue 16-100
Blue-purple 9-15
Purple-red 4-8
Red 0-3
Note: The appliance goes back to normal display if no operations after 3 seconds�