Philips GoPure GP3201 - Page 8

8
4 Philips GoPure car air purier troubleshooting
Problem 1
Philips GoPure car air purier
does not start.
Solution 1
• Verify that the 12V power
supply is on.
• Check the power connection
and make sure the socket is
properly inserted.
If your device still does not
restart, please contact your
retailer.
Problem 2
Some cars continue to power
the 12V outlet when the
engine is o.
Solution 2
Please disconnected the
device with 12V outlet before
leaving to prevent draining
the battery.
Problem 3
Philips GoPure car air
purier has been running
for a long time, yet my new
car continues to produce
unpleasant odor.
Solution 3
Some unpleasant odor in
new cars may come out
continuously from a variety
of sources. The GoPure car air
purier continues to purify the
air; however, some odors may
be produced continuously.
GoPure car air purier
reduces the air pollutants
considerably.