Philips GoPure Power - Page 7

6
7
6 Filter replacement and reset
Philips GoPure car air
purication system is
a multi-layer ltration
system that guarantees
the most eective
air-purication. All lter
layers are integrated in
one simple-to-replace
lter.
6.1 Filter replacement
reminder
1.Philips GoPure car
air purier reminds you
automatically when lter
need to be replaced.
2. Remove the old lter
as shown.
m Important
You must reset the
Philips GoPure device
after every lter
replacement.
1. Open top cover, press
& hold the cigarette
lighter’s control button
for 5s until “ding ding”
sound. The lter reset is
completed.
2. Car air purier operates
in normal mode once
top cover is locked.
3. Repeat the above steps
if the lter reset fails.
m Important
For you safety, GoPure
car air purier will shut
down automatically
whenever you open
the top cover.
3. Insert new original
GoPure lter. According
to the directions shown
above.
m Important
The lter slides in only
one way, do not force
it in.
6.2 How to replace
lter and reset GoPure
car air purier.
1. Push OPEN button,
take o top cover.
2. When the lter
need to be replaced,
the cigarette lighter
will display “FLt” and
device's AQI will alert in
yellow blinking light.
3. You can also enable
APP notication for
lter status monitoring.
m Important
Replace the lter
immediately using only
genuine Philips GoPure
SelectFilter Plus. With
the right lter, the
GoPure car air purier
will continue to perform
optimally and provide
the purest air quality
inside your car.