6 Put on the protective goggles provided.
C
7 Switch on the tanning lamps or the infrared lamps by pressing the
start button (I).
C
◗ A blinking signal will appear; the set time is shown on the display (25
minutes in this case).
The countdown of the set tanning or relax session time will now start.
C
◗ During the last minute of the session you will hear a audible signal.
C
◗ During this minute, you can press the pause/repeat button fi to repeat
the set time.
◗ It is also possible to set a new time.
This way you can avoid a waiting time of 3 minutes before the tanning lamps
can be used again,as the tanning lamps have to cool down for 3 minutes
after they have been switched off.
This waiting time does not apply to the infrared lamps (type HB875 only).
C
8 Set a new time by pushing button (-+).Then push the start button
(I).
The audible signal stops and the new set time starts running.
◗ Only type HB875:During the last minute you can also switch from the
tanning setting to the relax setting by switching the selector to l.
Pausing the tanning or relax session
C
9 Pause the tanning or relax session by pushing the pause button.
The tanning or IR lamps will be switched off.
Type HB871 only:the remaining time of the session will start to blink on the
display.After 3 minutes it will stop blinking.You can then switch the tanning
lamps back on again by pressing the start button.The remaining time will
then appear on the display.
Type HB875 only:the remaining time is visible on the display but does not
blink;you will have to watch the 3 minutes yourself.The waiting time does
not apply to the infrared lamps.
C
10 Restart the tanning or relax session by pushing the start button
again.
ENGLISH
12
To Next Page
Loading...
