Preparing for use
Note: This appliance can only be used directly from the mains.
Preparing the appliance
1 Make sure the appliance is switched off.
2 Insert the appliance plug into the appliance (1) and put the adapter in
the wall socket (2).
Using the appliance
The hair length settings are indicated in millimeters, the comb cuts the hair
to a length of 1mm to 23mm. The settings correspond to the remaining
hair length after cutting.
When you trim for the rst time, be careful. Do not move the trimmer
too fast. Make smooth and gentle movements.
Tip: Start trimming at a high length setting and reduce the length setting
gradually until you have reached the desired hair length.
Trimming with comb
1 Attach the comb onto the appliance.
ENGLISH 7
To Next Page
Loading...
