until the motor almost stops operating during
a session. Then recharge the battery. Follow this
procedure at least twice a year.
Using the appliance
The hair length settings are indicated in millimeters.
The settings correspond to the remaining hair length
after trimming.
Be careful when you trim for the rst time. Do
not move the trimmer too fast. Make smooth and
gentle movements.
Tip: Start trimming at a high length setting and reduce
the length setting gradually until you have reached the
desired hair length.
Using the display
This appliance has a swipe and tap display that you
can use in three different ways:
1 Quickly swipe your thumb or a nger across the
touch area to scroll through the length settings
quickly.
2 Slowly swipe your thumb or a nger across the
touch area to scroll through the length settings
slowly.
3 Tap on the bottom or top part of the touch
area to go through the length settings one
by one. To scroll through the length settings
automatically in steps of 0.1mm, tap and hold
the bottom or top part of the touch area.
ENGLISH
26
To Next Page
Loading...
