Note: If you want to save a length setting as number 2
or 3 in the memory, press the ‘M’ button again (once
for number 2 and twice for number 3).
3 To save a length setting as number 1, 2 or 3
of the memory, press the ‘M’ button for 2
seconds.
, The display shows the word ‘SEt’ when the
length setting is correctly saved. Memory setting
number 1,2 or 3 lights up continuously.
Selecting a memory setting
1 To enter the memory, press the ‘M’ button for
2 seconds.
, Number 1 starts to ash.
Note: To select number 2 or 3 in the memory, press
the ‘M’ button again (once for number 2 and twice for
number 3).
Length setting lock
This feature prevents accidental changing of the
length setting during trimming. Every time you switch
on the appliance, the length setting lock is activated.
You can only change the length setting if you switch
off the appliance.
1 Swipe upwards or downwards to select the
desired length setting.
2 sec.
2 sec.
ENGLISH
29
To Next Page
Loading...
