Philips HC9450 - Charging and Battery; Initial Charge and Runtime; Charging Indicators; Charging Procedure

Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic elds.
General
- The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.
Charging
Charge the appliance fully before you use it for the rst time or after a long
period of disuse.
When it is charged for 1 hour, the appliance has a cordless operating time
of up to 120 minutes.
Note: After charging the appliance fully for the rst time, you can also use the
appliance directly from the mains. Simply connect the appliance to the mains.
Charging indications
Battery low indication
- When the battery is almost empty, the charging light starts to ash orange.
Charging
- When the appliance is charging, the charging light ashes blue.
Battery fully charged
- When the battery is fully charged, the charging light lights up blue
continuously.
Note: After 30 minutes, the charging light goes out.
Charging the appliance
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance.
3 Put the adapter in the wall socket.
4 After charging, remove the adapter from the wall socket and pull the
small plug out of the appliance.
ENGLISH 5