Philips HC9450 - Memory Function Controls; Saving Multiple Settings; Selecting a Memory Setting; Accessing Saved Settings

Note: If you want to save a length setting as number 2 or 3 in the memory,
press the ‘M’ button again (once for number 2 and twice for number 3).
3 To save a length setting as number 1, 2 or 3 of the memory, press the
‘M’ button for 2 seconds.
, The display shows the word ‘SEt’ when the length setting is correctly
saved. Memory setting number 1,2 or 3 lights up continuously.
Selecting a memory setting
1 To enter the memory, press the ‘M’ button once.
, Number 1 starts to ash.
Note: To select number 2 or 3 in the memory, press the ‘M’ button again
(once for number 2 and twice for number 3).
Length setting lock
This feature prevents accidental changing of the length setting during
trimming. Every time you switch on the appliance, the length setting lock
is activated. You can only change the length setting if you switch off the
appliance.
1 Swipe upwards or downwards to select the desired length setting.
2 Switch on the appliance.
, The lock symbol starts to ash. You cannot change the length setting
anymore.
Note: If you want to select a different length setting, switch off the appliance.
Swipe on the display to select the desired length setting and switch on the
appliance again.
2 sec.
ENGLISH 9