This Philips appliance complies with all applicable standards and regulations
General
- The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.
Charging
period of disuse.
of up to 120 minutes.
Charging indications
Battery low indication
-
Charging
-
Battery fully charged
-
continuously.
Charging the appliance
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance.
3 Put the adapter in the wall socket.
4 After charging, remove the adapter from the wall socket and pull the
small plug out of the appliance.
ENGLISH 5
To Next Page
Loading...
