13
Problem Possible solution
The appliance continues
to drip long after the
brewing process has
ended.
The dripping is caused by condensation of steam. It is completely
normal that the appliance drips for some time.
If the dripping does not stop, the drip stop may be clogged. To clean
the drip stop, press the OPEN button on the right-hand side of the
If you remove the jug for more than 20 seconds during the brewing
The coffee is not hot
enough.
Make sure the jug is placed properly on the hotplate.
Make sure that the hotplate and the bottom of the jug are clean.
Use thin-walled cups, because they absorb less heat from the coffee
than thick-walled cups.
Do not use milk that comes directly out of the fridge.
Descale the appliance. See section ‘Descaling’ in chapter ‘Cleaning and
maintenance’.
ENGLISH
To Next Page
