Flushing the machine to ll the boiler
YOU CANNOT BREW COFFEE IF YOU HAVE NOT FLUSHED THE
SENSEO
®
COFFEE MACHINE FIRST!
The ushing cycle causes the boiler to be lled with water. After this,
the coffee machine is ready for use.
Flush the machine in the following way:
1 Remove the water reservoir.
2 Fill the water reservoir with water up to the MAX indication.
3 Put the water reservoir back.
4 Place a bowl with a capacity of at least 1.5 litres on the cup tray.
5 Make sure a pod holder, without pod or pods, is in place.
6 Put the plug in an earthed wall socket.
ENGLISH 9
To Next Page
Loading...
