Philips Senseo HD7862/20 User Manual

Service Manual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Coffee Maker Senseo
HD7862/20
HD7862/21
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage : 220 - 240 V
- Frequency : 50 - 60 Hz
- Power consumption : 1450 W
- Standby power :  1 W
- Contents reservoir : 1200 cc
- Colour setting : Bright style
- Sap coding : HD7862/20
- Dimensions (L x W x H) : 250 x 175 x 285 mm
OPTIONAL (accessories)
- No specific issues
11/10
CONTROL
PCB
L
N
Boiler
Pump M
Temp.
Sensor
Water level
sensor S1
Push buttons Strength
Select
switch
Brewhead
detection
sensor
TCO
Fuse
Fuse

Philips Senseo HD7862/20 Specifications

General

Type	Coffee maker
Model	HD7862/20
Brand	Philips
Color	Black
Power	1450 W
Voltage	220-240 V
Frequency	50/60 Hz
Brewing Time one cup	30 seconds
Brewing Time two cups	60 seconds
Auto Shut-off	Yes
Auto power off after	30 minutes
Cord Length	0.8 m
Maximum operating pressure	1 bar
Programmable	No
Removable Water Tank	Yes
Drip Stop	Yes
Water Tank Capacity	1.0 L
Coffee Pods	Senseo pods
Number of Cups	1 or 2 cups

Summary

Service Manual

Product Information

Details product compliance with interference suppression and safety requirements post-repair.

Technical Specifications

Provides key technical data including voltage, frequency, power, reservoir capacity, and dimensions.

Optional Accessories

Notes that there are no specific issues related to optional accessories.

Disassembly and Re-assembly Advice

Appliance Disassembly Steps

Step-by-step guide to disassembling the main body of the appliance, including panel removal.

Lid Assembly Disassembly

Instructions for disassembling the lid assembly, focusing on screw and snap lock removal.

Lid Cover Removal

Details on removing the lid cover using snap locks accessible from the appliance's backside.

Repair Instructions

Descaling Procedure

Explains the importance, frequency, and correct descaling agents for Senseo maintenance.

Volume Adjustment

Procedure for adjusting coffee volume output using the one-cup and two-cup buttons and LED feedback.

Automatic Filling Procedure

Describes the appliance's automatic filling routine for the boiler, including first-use and flag clearing.

Restoring Boiler Empty Flag

Instructions on how to reset the 'Boiler_empty_flag' to production default, useful for preventing freezing.

Parts List

Component Identification

Lists various parts of the appliance with their corresponding service codes and descriptions.

Exploded View Diagram

Main Body Components

Illustrates the primary external and accessible internal components of the coffee maker.

Lid and Button Assembly

Details the lid button assembly, including warnings about specific screw removal.

Brewing Unit and Housing Components

Shows exploded views of the brewing unit, spout assembly, and outer housing panels.

Boiler and Internal Systems

Illustrates the boiler assembly, pump, valve, and associated plumbing and PCB components.