Philips Senseo HD7863/10 - User Manual

Service Manual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Coffee Maker Senseo
HD7863/10
HD7864/11
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage : 220 - 240 V
- Frequency : 50 - 60 Hz
- Power consumption : 1450 W
- Standby power :  1 W
- Contents reservoir : 1200 cc
- Colour setting : Star white
OPTIONAL (accessories)
- No specific issues
12/08
CONTROL
PCB
L
N
Boiler
Pump M
Temp.
Sensor
Water level
sensor S1
Push buttons
Brewhead
detection
sensor
TCO
Fuse
Fuse

Summary

Product Information

Technical Information

Optional Accessories

Disassembly and Re-assembly Advice

Repair Instruction

Descaling

Important maintenance for Senseo to prolong life and ensure optimal brewing results.

Repair Instruction

Volume Adjustment

Procedure to adjust one-cup and two-cup volume output using the PCB circuit board and user controls.

Automatic Filling Procedure

Senseo PCB automatic filling routine for initial setup or after specific events.

Boiler Empty Flag Reset

Procedure to restore the Boiler_empty_flag to production default for flush routine activation.

Parts List

Exploded View

Exploded View

Exploded View

Exploded View

Philips Senseo HD7863/10 Specifications

General

Type	Coffee Maker
Model	HD7863/10
Brand	Philips
Color	Black
Power	1450 W
Voltage	220-240 V
Frequency	50-60 Hz
Cups Capacity	2 cups
Coffee Type	Ground coffee or coffee pods
Cord Length	0.8 m
Brewing Time One Cup	30 seconds
Brewing Time Two Cups	60 seconds
Pump Pressure	1 bar
Material	Plastic
Special Features	Automatic shut-off, Removable Water Tank, Dishwasher safe parts
Maximum Cup Height	10 cm