Philips Senseo “Latte Select” HD7850/60 User Manual

Service Manual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Coffee Maker Senseo “Latte Select”
HD7850/60
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage : 220 - 240 V
- Frequency : 50 - 60 Hz
- Power consumption : 2650 W
Boiler : 1450 W
Steam heater : 1200 W
- Standby power (switched off) : < 1 W
- Standby power : ± 30 W
(switched on 30 min) (room temperature)
- Pressure Coffee system : < 1.6Bar
- Pressure Steam system : < 1 Bar
- Contents water reservoir : 1200 cc/mL
- Contents milk reservoir : 120 cc/mL
- Auto shut off : 30 min
- Variable Coffee volume : Min, Normal and Max
08/09
Coffee volume overview
Min cc/mL Normal cc/mL Max cc/mL
France version 80 100 140
General version 80 122 145
Coffee/Milk receipe volume
all versions cc/mL
Indication temperature for
chosen Coffee/Milk receipe,
very depended from milk inlet
temperature. (°C)
Cappuccino 160 ± 16 ≥ 69
Latte Macchiato 220 ± 24 ≥ 63
Café Latte 190 ± 20 ≥ 67
- Colour setting : Deep Black
- Sap coding : HD7850/60

Philips Senseo “Latte Select” HD7850/60 Specifications

General

Brand	Philips
Model	Senseo “Latte Select” HD7850/60
Category	Coffee Maker
Language	English

Summary

Product Information Overview

Technical Coffee Maker Specifications

Steam Circuitry Diagram

Electrical Circuitry Diagram

Disassembly and Reassembly Procedures

Repair Instructions and Maintenance

Descaling Guide

Procedure for descaling the coffee maker to ensure optimal brewing results and prolong appliance life.

Volume Adjustment Settings

Instructions on how to adjust the coffee volume output for one-cup and two-cup settings.

Sensor and Button Diagnostics

Service routine to check the functionality of various sensors and push buttons on the appliance.

Automatic Filling Process

Guidance on the automatic filling procedure software routine for the Senseo PCB.

Boiler Empty Flag Reset

Steps to restore the Boiler_empty_flag to production default for troubleshooting or transport scenarios.

Parts List

Exploded Views of Components