Philips HearLink 5040 MNB T R - Technical information

75
Technical information
The hearing aids contain the following
two radio technologies:
The hearing aids contain a radio
transceiver using short-range magnetic
induction technology operating at
3.84MHz. The magnetic eld strength
of the transmitter is very weak and
always below 15nW (typically below
–40dBμA/m at a distance of 10metres
(-12.20 dBμA/ft) at a distance of 33feet).
The hearing aids also contain a radio
transceiver using Bluetooth Low Energy
technology and a proprietary, short-range
radio technology both operating at ISM
band 2.4GHz.
The radio transmitter is weak and always
below 9mW equal to 9.6dBm in total
radiated power.
Only use your hearing aids in areas where
wireless transmission is permitted.
The hearing aids comply with
international standards concerning
radio transmitters, electromagnetic
compatibility, and human exposure.
Due to the limited space available on the
hearing aid, relevant approval markings
can be found in this booklet.
Additional information can be
found in the Specication Guide on
hearingsolutions.philips.com