Travelling east
Travelling west
Light intensity
Use the Philips EnergyUp in addition to the normal room lighting. The Philips EnergyUp is more
How to use the appliance
1 Insert the small plug in the socket on the back of the appliance (Fig. 2).
2 Fold out the stand. To ensure the light reaches your eyes, this appliance has a stand that can
be set to a variable angle.
-
-
-
Note: To hang the appliance on a wall, drill two holes 100-120mm apart and insert two hooks with a
diameter of 4mm (Fig. 6).
3 Insert the adapter in a wall socket (Fig. 7)
4 Make sure that the appliance is positioned at arm’s length (at approximately 50-75cm
-
-
e.g. place it on the table at which you are sitting.
-
ENGLISH10
To Next Page
Loading...
