Philips HF3520 - Adjusting the Sunrise Simulation Time

20
2
5
60 min
3
1
Fall-asleep
To use the fall-asleep function you need to select a timer and a sound setting.
1. Press the fall-asleep button to switch on the fall-asleep function. The fall-asleep time ashes on the
display for a few seconds.
2. Press the + or – button to adjust the time (5 to 60 minutes). Press the ‘SELECT’ button to conrm
the timer setting.
3. The last used sound ashes on the display. Press the + or – button to select the sound. Press the
‘SELECT’ button to conrm the sound setting.
To switch off the fall-asleep function, press the fall-asleep button again. The fall-asleep icon disappears
from the display.
Note:
If you press the fall-asleep button without setting the time or the sound, the lamp goes on and then
dims gradually over 30 minutes.