17EN
3 To add a service,
• Select a service. Press FAV.
» A pop-up screen is displayed for you to select the program type.
» The Favorite icon is added next to the service.
4 To remove the service,
• Select the service. Press FAV again.
» The Favorite icon is removed.
To access a favorite service
1 On the remote control, press FAV.
» A pop-up screen is displayed for you to select a service.
2 To switch between program types, press .
3 To select a service, press and OK.
Re-assign channel numbers
1 Switch off the logical channel number (LCN).
a On the remote control, press SETUP.
b In > LCN, press to select [Off].
2 Move a service to the channel number that you want to assign:
a In > [Program Edit], select a service.
Enter your password (000000 by default).
b On the remote control, press the Red button.
» The Move icon is added next to the service.
c Press / to move the service.
d To stop moving, press the Red button again.
» The Move icon is removed.
To Next Page
Loading...
