3 Press the lever to open the attachment and place a lower area of the
same section of hair between the plates. Make sure there is an overlap.
4 Repeat this process until you have reached the hair tip.
5 To style the rest of your hair, repeat steps 1 to 4.
Create straight sleek style and icks
1 Press the lever (
) to open the attachment and place a section of
hair between the straightening plates.
2 Slide the styler down the length of the hair in a single motion (max.
5 seconds) from root to end, without stopping to prevent overheating.
To create the desired type of ick, turn the styler half-circle inwards
•
(or outwards) when it reaches the last 3-5 cm of the hair tip. Hold
the styler in that position for 2 to 3 seconds, and then release it.
3 After 20 seconds, repeat step 2 until you achieve the desired look.
4 To style the rest of your hair, repeat steps 1 to 3.
After use:
1 Unplug the appliance.
2 Place it on a heat-resistant surface until it cools down.
3 Remove hairs and dust from the appliance and attachments.
4 Clean the appliance, straightening plates, and curling tongs by damp
cloth.
5 Keep the appliance in a safe and dry place, free of dust. You can also
store the appliance in the supplied storage pouch.
3 Guarantee and service
If you need information e.g. about replacement of an attachment or if
you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you nd
its phone number in the worldwide guarantee leaet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.
To Next Page
Loading...
