Regular cleaning and proper maintenance ensure optimal results and
guarantee a long life for the appliance.
Clean the Ladyshave after each use.
Do not clean, rinse or immerse the Ladyshave in water if the cover of
the battery holder is not closed properly.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
1 Switch off the appliance (Fig. 15).
2 Detach the shaving head from the appliance (see chapter ‘preparing
for use’).
3 Remove the shaving unit from the shaving head (Fig. 16).
Note: Do not exert too much pressure on the shaving foil to avoid damage.
4 To clean the shaving head and shaving unit, rinse them under the
tap or use the cleaning brush (Fig. 17).
Note: Do not clean the appliance with water above shower temperature.
5 Rinse the hairs off the appliance (Fig. 18).
6 Make sure the appliance is completely dry before you reattach the
shaving unit (Fig. 19).
1 Lubricate the shaving foil with a drop of sewing machine oil twice a
year (Fig. 20).
2 Apply some vaseline to the rubber sealing ring from time to
time to keep the Ladyshave watertight.
1 Put the protection cap on the appliance.
Note: The protection cap prevents the shaving head from becoming damaged.
11
To Next Page
Loading...
