Philips HP8180 - 2 Straighten your hair; 3 Guarantee and service

2 Straighten your hair
1 Connect the plug to a power supply socket.
2 Slide the on/off switch (
) to to switch on the appliance.
» The power-on indicator (
) lights up.
» After 30 seconds, the appliance heats up.
3 Slide the closing lock (
) to unlock the appliance.
4 Comb your hair and take a section that is not wider than 5cm for
straightening.
5 Place it between the straightening plates (
) and press the handles
together.
6 Slide the straightener down the length of the hair in a single motion
(max. 5 seconds) from root to end, without stopping to prevent
overheating.
•
To create icks, turn the straightener half-circle inwards (or
outwards) when it reaches the hair ends. Hold the straightener in
that position for 2 to 3 seconds, and then release it.
7 After 20 seconds, repeat step 6 until you achieve the desired look.
8 To straighten the rest of your hair, repeat steps 4 to 7.
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and straightening plates by damp cloth.
4 Lock the straightening plates (
).
5 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop (
).
3 Guarantee and service
If you need information e.g. about replacement of an attachment or if
you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you nd
its phone number in the worldwide guarantee leaet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.