EasyManua.ls Logo

Philips HP8230 - Electromagnetic Fields (EMF)

Philips HP8230
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• For additional protection, we advise
you to install a residual current device
(RCD) in the electrical circuit that
supplies the bathroom. This RCD
must have a rated residual operating
current not higher than 30mA. Ask your
installer for advice.
• Do not insert metal objects into the air grilles to avoid electric shock.
• Never block the air grilles.
• Before you connect the appliance, ensure that the voltage indicated
on the appliance corresponds to the local power voltage.
• Do not use the appliance for any other purpose than described in
this manual.
• Do not use the appliance on articial hair.
• When the appliance is connected to the power, never leave it
unattended.
• Never use any accessories or parts from other manufacturers or that
Philips does not specically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
• Do not wind the mains cord round the appliance.
• Wait until the appliance has cooled down before you store it.
Noise Level: Lc = 83dB [A]
Electromagnetic elds (EMF)
This appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientic evidence
available today.