C
3 Remove the shaving unit.
C
4 Clean the inside of the shaving unit and the
hair chamber with the brush.
5 Put the shaving unit back onto the shaver.
Shaving heads
Clean the shaving heads every two months.
1 Switch the shaver off,remove the
powerplug from the wall socket and pull
the appliance plug out of the shaver.
C
2 Remove the shaving unit.
C
3 Turn the wheel anticlockwise and remove
the retaining frame.
C
4 Remove and clean the shaving heads
(cutters and guards) one by one.
Do not mix up the cutters and the guards.
This is essential since each cutter has been
ground with its corresponding guard for optimal
ENGLISH 7
To Next Page
Loading...
Need help?
General
