Philips HQ481 - Page 9

1 Switch the shaver off, remove the mains
plug from the wall socket and pull the
appliance plug out of the shaver.
C
2 Press the release button (1) and remove
the shaving unit (2).
C
3 Remove the retaining frame by pushing the
sides of the central spring towards each
other (1) and lifting the retaining frame out
of the shaving unit (2).
C
4 Slide the shaving heads out of the retaining
frame.
C
5 Slide the new shaving heads into the
retaining frame.
C
6 Put the retaining frame back into the
shaving unit.
7 Put the shaving unit back onto the shaver.
ENGLISH 11