The appliance is equipped with an automatic
voltage selector and is suitable for mains
voltages from 100 to 240 volts.
Noise level: Lc = 60 dB(A)
Compliance with standards
This Philips appliance complies with all standards
regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientic evidence available today.
Charging
Make sure the appliance is switched off before you
start charging it.
When you charge the shaver for the rst time
or after a long period of disuse, let it charge
continuously for 4 hours. Charging normally takes
approx. 90 minutes.
You can also shave without charging, simply connect
the shaver to the mains.
Do not leave the appliance connected to the mains
for more than 24 hours.
Charge indications
Charging
As soon as you start charging the empty shaver,
the green charging light goes on.
-
-
,
To Next Page
Loading...
Need help?
General
