performance.If you accidentally mix the sets up,it
could take several weeks before optimal shaving
performance is restored.
C
5 Clean the cutter with the short-bristled
side of the brush.
Brush carefully in the direction of the arrow.
C
6 Brush the guard.
If necessary,you can clean the shaving unit with a
degreasing liquid (e.g.alcohol).Remember to
lubricate the central point of the guards with a
drop of sewing machine oil after cleaning.
C
7 Reassemble the shaving unit by replacing
the retaining frame.Press the wheel and
turn it clockwise.
8 Put the shaving unit back onto the shaver.
Trimmer
Clean the trimmer every time you have used it.
1 Switch the shaver off,remove the
powerplug from the wall socket and pull
the appliance plug out of the shaver.
2 Brush the trimmer.
3 Lubricate the trimmer teeth with a drop
of sewing machine oil every six months.
ENGLISH8
To Next Page
Loading...
Need help?
General
