Philips HQ7360 - Charge indications; Charging; Battery fully charged; Battery running low

Charging normally takes 1 hour.
You can also shave without charging by connecting
the shaver to the mains.
Charge indications
Charging
- When you start charging the empty shaver, the
charging light goes on.
Battery fully charged
- When the battery is fully charged, the charging
light starts ashing.
When you unplug the shaver, the charging light goes
out.
Battery running low
- When the battery is running low, the battery-low
light goes on.
When you switch off the shaver, this light ashes a
few times.
Cordless shaving time
After having been charged for 6 minutes, the battery
contains enough energy for one shave.
When the shaver is fully charged, it has a cordless
shaving time of up to 35 minutes.
Charging the appliance
Charge the shaver when the battery-low light goes
on.
1 Put the appliance plug in the shaver.
2 Put the adapter in the wall socket.
3 Remove the adapter from the wall socket and
pull the appliance plug out of the shaver when
the battery is fully charged.
ENGLISH6