C
3 Turn the wheel anticlockwise and remove
the retaining frame.
C
4 Remove the shaving heads and place new
ones in the shaving unit in such a way that
the parts with the small holes point
towards the centre of the shaving unit.
Make sure that the projections of the shaving
heads fit exactly into the recesses.
C
5 Put the retaining frame back into the
shaving unit.Press the wheel and turn it
clockwise.
Storage
C
◗ Put the protection cap on the shaver to
prevent damage.
◗ You can store the appliance in the pouch
supplied.
Environment
Disposal of the batteries
The built-in rechargeable batteries contain
substances that may pollute the environment.
Remove the batteries when you discard the
ENGLISH 11
To Next Page
Loading...
