Philips HR2028 - Page 11

Cleaning
Always unplug the appliance before you clean it.
Never immerse the motor unit in water, nor rinse it under the tap. Do not clean the motor unit
in the dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Tip: Cleaning the appliance and its parts is easiest immediately after use.
1 Make sure the appliance is unplugged.
2 Disassemble all removable parts.
Do not forget to remove the blender sealing ring.
Do not touch the blades. The blades are very sharp.
3 Clean the motor unit with a moist cloth.
4 Clean the removable parts in hot water with some washing-up liquid.
Note: All parts except the motor unit can be cleaned in the dishwasher.
Storage
Note: Make sure the blender is clean and dry when you store it.
1 To store the mains cord, wind it round the reel in the base of the motor unit (Fig. 13).
2 Screw the blade unit anticlockwise onto the bottom of the blender jar.
3 Turn the blender jar upside down.
4 Put the blender jar on the motor unit.
Note: Make sure the handle of the blender jar is at the back of the motor unit.
5 Place the lid on top of the blender jar (Fig. 14).
Environment
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 15).
Guarantee and service
If you need information or if you have a problem, please visit the Philips website at www.philips.com or
contact the Philips Customer Care Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Customer Care Centre in your country, go to your local Philips
dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.
ENGLISH 11