8
2 Fix the hopper onto the motor unit.
1) Press and hold the button.
2) Push the hopper towards the motor
unit and turn it anti-clockwise until you
hear a “click”.
3 Fix the feeding tray onto the hopper.
4 Connect the power plug to the power
supply.
Tip
•
Make sure that the projections on the hopper align
with the notches of the motor.
• Never use the cutter in combination with any plastic
accessory.
• Remove the protective cover from the cutter before use.
• Make sure that the cutting edge of the cutter points
outwards.
4 Mince meat
Before you use the appliance for the rst time,
thoroughly clean the parts that come into
contact with food.
Assemble
Unplug this appliance before the assembly.
1 Assemble the hopper and accessories.
1) Push the worm shaft into the cutter
housing.
2) Fix the cutter onto the worm shaft.
3) Fix the grinding disc onto the worm
shaft and the hopper.
4) Turn the screw ring clockwise to fasten it.
EN
To Next Page
