Philips HR7783 - Page 7

3
English
EN
accessories, or approaching
parts that move in use.
• Thoroughly clean the parts that
come into contact with food
before you use the appliance
for the rst time. Refer to the
instructions and table for
cleaning given in this manual.
• Never use any accessories
or parts from other
manufacturers that Philips
does not specically
recommend. If you use such
accessories or parts, your
guarantee becomes invalid.
• Do not exceed the maximum
level indication on the bowl or
the jar. Follow the quantities,
processing time and speed as
indicated in the user manual.
• Let hot ingredients cool down
(< 60 °C) before processing
them.
• Always let the appliance cool
down to room temperature after
each batch that you process.
• Certain ingredients such
as carrots may cause
discolorations on the surface
of the parts. This does not
have a negative eect on
the parts. The discolorations
usually disappear after some
time.
is plugged in. The blades are
very sharp.
• If the blades get stuck, unplug
the appliance before you
remove the ingredients that
block the blades.
• Be careful if hot liquid is
poured into the food processor
or blender as it can be ejected
out of the appliance due to a
sudden steaming.
• This appliance is intended for
household use only.
Caution
• Never switch o the appliance
by turning the blender jar,
the bowl, or their lids. Always
switch o the appliance by
turning the speed selector to 0
or OFF.
• Unplug the appliance
immediately after use.
• Always wait until the moving
parts stop running, then switch
o and unplug the appliance
before opening the lid and
reaching into any of the parts
that move in use.
• Always switch o and unplug
the appliance if it is left
unattended, and before
assembling, disassembling,
cleaning and changing