Filling the shaving conditioner cartridge
1 Remove the tab of the NIVEA FOR MEN
shaving conditioner bottle.
2 Turn the cap of the conditioner bottle
clockwise (‘click’).
The cap moves downwards and the conditioner
nozzle appears.
3 Place the nozzle of the conditioner bottle in
the lling opening of the conditioner cartridge.
4 Move the bottle up and down approx. 5 times
to pump shaving conditioner into the cartridge
until you see that the cartridge is full.
Do not ll the cartridge beyond the MAX
indication.
Using your shaver
Note: Your skin may need 2 to 3 weeks to get
accustomed to a new shaving system.
1 Make sure there is sufcient shaving
conditioner in the shaving conditioner
cartridge.
2 Press the on/off button to switch on the shaver.
3 Make sure the battery is not low (see chapter
‘Getting started’, section ‘Charge indications’).
,
ENGLISH 9
To Next Page
Loading...
