Philips HTL2100 - Product Specifications; Amplifier and Audio Details; Main Unit and Battery Specs

11 EN
6 Product
specifications
Note
• Specicationsanddesignaresubjecttochangewithout
notice.
Amplier
• Total output power: 40W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz / ±3
dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 650 mV
• AUDIO-IN: 400 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Main unit
• Power supply: 220-240 V~, 50 Hz
• Power consumption: 40 W
• Standbypowerconsumption:≤0.5W
• Speaker impedance: 8 ohm (full range)
• Speaker drivers: 4 x 54.5 mm (2")
• Dimensions (WxHxD): 845 x 74.5 x 94
mm
• Weight: 2.0 kg
Remote control batteries
• 1 x CR2025