EasyManua.ls Logo

Philips HTS2500/12 - Connecting Your Home Theater System; Connector Identification and Ports; Connecting to Your Television

Philips HTS2500/12
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
d VIDEO OUT - VIDEO
Connects to the composite video input on
the TV.
e VIDEO OUT - Y Pb Pr
Connects to the component video input on
the TV.
f FM ANTENNA
Connects the FM antenna for radio
reception.
Connect to the TV
Connect your home theater directly to a TV
through one of the following connectors (from
highest to basic quality video):
a Component video
b Composite video
Option 1: Connect to the TV through
YPbPr (component video)
Note
The component video cable or connector
might be labeled Y Cb Cr or YUV .
(Cable not supplied)
Component Video Out
Component Video In
TV
4 Connect your home
theater
This section helps you connect your home theater
to a TV and other devices. The basic connections of
the home theater with its accessories are provided
in the Quick Start. For a comprehensive interactive
guide, see www.connectivityguide.philips.com.
Note
Refer to the type plate at the back or bottom
of the product for identi cation and supply
ratings.
Before you make or change any connections,
ensure that all devices are disconnected from
the power outlet.
Connectors
Side connectors
a ( USB )
Audio, video or picture input from a USB
storage device.
Back connectors
a AC MAINS~
Connects to the power supply.
b SPEAKERS
Connects to the supplied speakers and
subwoofer.
c AUDIO IN-AUX
Connects to the analog audio output on the
TV or an analog device.
EN

Other manuals for Philips HTS2500/12

Related product manuals