Philips HTS5110 - Connect to Television

7
Option 2: Connect to the TV through
composite video (CVBS)
Note
The composite video cable or connector might •
be labeled AV IN, VIDEO IN, COMPOSITE or
BASEBAND.
Option 3: Connect to the TV through
SCART
Use the supplied scart adapter.
TV
TV
b VIDEO OUT
Connects to the composite video input on
the TV.
c HDMI OUT
Connects to the HDMI input on the TV.
d FM ANTENNA
Connects the FM antenna for radio
reception.
e COAXIAL IN
Connects to the coaxial audio output on
the TV or a digital device.
f AUX IN
Connects to the analog audio output on the
TV or an analog device.
Connect to the TV
Connect your home theater directly to a TV
through one of the following connectors (from
highest to basic quality video):
a HDMI
b Composite video
c SCART
Option 1: Connect to the TV through
HDMI
Note
If the HDTV has a DVI connector, connect •
using an HDMI/DVI adapter.
If the TV supports EasyLink HDMI CEC,
•
control the home theater and TV with one
remote control (see ‘Use Philips EasyLink’ on
page 11).
TV
English
EN