12
6 Change settings
This section helps you to change the settings of
your home theater.
Caution
Most of the settings are already confi gured •
with the best value for the home theater.
Unless you have a specifi c reason to change a
setting, it is best to leave it at the default value.
Access the setup menu
1 Press SETUP.
The following menu appears.»
Symbol Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2 Select a setup menu, then press OK.
See the following sections for information
about how to change the settings of your
home theater.
3 Press BACK to return to the previous
menu, or press
SETUP to exit.
Note
You cannot change a setting that is grayed out.•
4 Select the conversion settings in the
[OPTIONS] panel, then press OK.
• [Speed] : Selects the write-to-fi le
speed.
• [Bitrate] : Selects the conversion
quality.
5 Press to access the [TRACK] panel.
6 Select an audio track, then press OK.
• [Select All] : Selects all tracks.
[
• Deselect all] : De-selects all tracks.
7 Select [Start] in the menu to convert, then
press OK.
A new folder is created in the USB »
storage device to store all the new MP3
audio fi les.
To exit the menu, select
• [Exit] and
press OK.
Note
During the conversion process, do not press •
any buttons.
DTS CDs and copy-protected CDs cannot be
•
converted.
Write-protected or password-protected USB
•
storage device cannot be used to store MP3
fi les.
EN
To Next Page
Loading...
