Philips HTS5581 - USB Storage Devices

22
Clear memory
If your storage device does not have enough
memory for the BD-Live content, clear the
memory on the storage device.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Clear memory], and
then press OK.
» This clears the local memory and deletes
the BD-Live les that you downloaded
on your storage device.
Disable BD-Live
To restrict access to BD-Live, turn on the BD-
Live security.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [BD-Live security] >
[On], and then press OK.
» BD-Live access is restricted.
Note
• You cannot restrict internet access on
commercial Blu-ray discs.
USB storage devices
Enjoy pictures, audio and video on a USB storage
device.
What you need
• A USB storage device that is formatted for
FAT or NTFS le systems, and complies
with the Mass Storage Class.
• A USB extension cable, if the USB storage
device does not t into the connector.
Note
• You can use digital cameras connected by USB
if they can play the les without using a special
computer program.
• To play DivX DRM - protected les from
a USB storage device, connect your home
theater to a TV through an HDMI cable.
Access BD-Live with a USB storage
device
1 Connect your home theater to the home
network and internet (see ‘Computers and
the Internet’ on page 17).
2 Connect the USB storage device to the
home theater.
• The USB storage device is used
to store the downloaded BD-Live
content.
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Advanced] > [Local Storage] >
[USB], and then press OK.
6 Select the BD-Live icon in the disc menu,
and then press OK.
» BD-Live starts to load. The loading time
depends on the disc and your internet
connection.
7 Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
item.
Access BD-Live with an SD card
1 Connect your home theater to the home
network and internet. (see ‘Computers and
the Internet’ on page 17)
2 Insert the SD memory card into the SD
CARD slot on your home theater.
» The rst time you insert an SD memory
card, the card is formatted. After
formatting, leave the card in the home
theater (see ‘Format an SD card’ on page
32).
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Advanced] > [Local Storage] > [SD
card], and then press OK.
6 Select the BD-Live icon in the disc menu,
and then press OK.
» BD-Live starts to load. The loading time
depends on the disc and your internet
connection.
7 Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
item.
EN