Philips HTS5581 - Page 41

41
English
Amplier
• Total output power:
• Europe and Asia: 1000W RMS (30%
THD)
• Latin America: 800W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX1, AUX2: 1000 mV
• Music iLink: 500 mV
Video
• Signal system: PAL / NTSC
• HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p24
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
• Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 32 kbps - 320 kbps
• WMA: 48 kbps - 192 kbps
Radio
• Tuning range:
• Europe/China: FM 87.5-108 MHz (50
kHz)
• Asia Pacic/Russia/Latin America: FM
87.5-108 MHz (50/100 kHz)
• Signal-to-noise ratio: FM 50 dB
• Frequency response: FM 180 Hz-12.5 kHz
/ ±3 dB
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32, NTFS
• Maximum memory support: < 160 GB
.mkv les in MKV container
Audio codec Video codec Bit rate
PCM, Dolby
Digital, DTS
core, MPEG,
MP3, WMA,
AAC, HE-
AAC
MPEG 1, MPEG
2
20 Mbps (peak
40 Mbps)
MPEG 4 ASP 10 Mbps max
H.264/AVC
HP@4.1/4.0;
MP@3.2/3.1/3.0
20 Mbps (peak
40 Mbps)
WMV9 20 Mbps
.asf and .wmv les in ASF container
Audio
codec
Video codec Bit rate
PCM,
Dolby
Digital,
MP3,
WMA
MPEG 4 ASP 10 Mbps max
H.264/AVC
HP@4.1/4.0;
MP@3.2/3.1/3.0
20 Mbps (peak
40 Mbps)
WMV9 20 Mbps
.mpg and .mpeg les in PS container
Audio
codec
Video codec Bit rate
PCM,
DTS core,
MPEG,
MP3
MPEG 1,
MPEG 2
20 Mbps (peak 40
Mbps)
MPEG 1,
MPEG 2
20 Mbps (peak 40
Mbps)
.rm and .rmvb les in RM container (Available
only in Asia Pacic and China)
Audio
codec
Video
codec
Bit rate
AAC,
COOK
RV30,
RV40
20 Mbps (peak 40
Mbps)
EN