To Next PageTo Next Page
Need help?Do you have a question about the Philips HU4803/01 and is the answer not in the manual?
General| Type | Evaporative |
|---|---|
| Humidification Capacity | 220 ml/h |
| Water Tank Capacity | 2 liters |
| Room Size | Up to 25 m² |
| Noise Level | 26 dB |
| Power Consumption | 17 W |
| Operating Time | Up to 8 hours |
| Number of Speeds | 3 |
| Voltage | 220-240 V |
| Humidistat | Yes |
| Auto Shut-off | Yes |
| Dimensions | 249 x 249 x 339 mm |
| Filter Type | NanoCloud |
Read this user manual carefully before use and save for future reference.
Do not spray flammable materials or drink/use water from the tank.
Check voltage and power cord condition before connecting the humidifier.
Ensure proper power socket connection and place humidifier on a dry, stable, level surface.
Ensure proper assembly, use original filters, avoid knocking, and keep fingers away from openings.
Avoid use near chemical fumes, heat sources, or in rooms with major temperature changes.
Always unplug before cleaning; pour water from the opposite side of drain holes; avoid abrasive cleaners.
Soak the filter in tap water for one hour, rinse gently without squeezing, and let excess water drip off.
Check power supply, water tank fill level, and proper placement of the upper unit.
Verify water level, upper unit placement, and check if humidity level exceeds 70%RH.
Ensure the tank is not overfilled, the humidifier is correctly assembled, and the water tank is properly placed.
