Philips InnoSpire Go How To Use

Attach the mouthpiece to the
handset.
Close the lid.
Lift the lid of the green medication
chamber and empty the contents
of your medication vial into the
chamber.
If you are using a mask, you
should attach the facemask
adapter to the mouthpiece and
then attach your mask to the
adapter.
Make sure you don’t exceed
the maximum ll volume,
which is marked by the word
MAX under the hinge.
If you are going to use the power
adapter, plug the cable into the
socket on the handset and plug the
adapter into the power outlet.
1
4
2
5
3
6
How to use your Philips InnoSpire Go
The following is a basic guide for using a Philips InnoSpire Go portable mesh nebulizer. You should
always refer to the instructions for use supplied for more detailed and specific instruction.

Philips InnoSpire Go Specifications

General

Type	Portable Mesh Nebulizer
Medication Capacity	8 ml
Weight	111 g
Power Source	Rechargeable battery
Technology	Vibrating mesh
Battery Life	Up to 30 treatments (typical)
Nebulization Rate	0.25 ml/min
Treatment Time	4 minutes
Operating Mode	Continuous
Noise Level	< 50 dBA
Operating Conditions	10°C to 40°C