What to do if my Philips InnoSpire Go doesn't end treatment?
If your Philips Respiratory Product doesn't indicate the end of treatment even after all medication is nebulized, try recharging the battery. Also, ensure that the power cable is correctly connected to both the handset and the wall outlet. If it's already connected, disconnect and reconnect it.
How to fix Philips Respiratory Product when LED doesn't turn on during charging?
If the LED doesn't pulse or turn on when charging the battery of your Philips Respiratory Product, it might be due to the battery having insufficient charge. Follow the battery charging instructions to resolve this.
General| Type | Portable Mesh Nebulizer |
|---|---|
| Medication Capacity | 8 ml |
| Weight | 111 g |
| Power Source | Rechargeable battery |
| Technology | Vibrating mesh |
| Battery Life | Up to 30 treatments (typical) |
| Nebulization Rate | 0.25 ml/min |
| Treatment Time | 4 minutes |
| Operating Mode | Continuous |
| Noise Level | < 50 dBA |
| Operating Conditions | 10°C to 40°C |
Provides essential details about the InnoSpire Go's intended use and application.
Lists critical safety precautions and warnings for using the nebulizer.
Step-by-step guide on how to assemble and operate the InnoSpire Go nebulizer.
Detailed instructions for cleaning the nebulizer parts after each use, daily, and weekly.
Specific instructions for cleaning the mask and mask adapter components.
Information on the lifespan and replacement schedule for consumable parts like the mouthpiece assembly.
Explanation of the LED indicator lights and their meanings during operation and charging.
List of available replacement parts and optional accessories with their part numbers.
Specific technical performance data of the nebulizer according to EN13544-1 standard.
Graph showing drug deposition versus aerodynamic diameter for Salbutamol.
Explanation of symbols used throughout the manual for clarity and understanding.
Manufacturer's declaration and guidance on electromagnetic emissions compliance.
Manufacturer's declaration and guidance on electromagnetic immunity requirements.
Guidelines for maintaining safe distances from RF equipment to prevent interference.
To Next Page
